Pulsed laser deposited InGaZnO thin film on silica glass

dc.contributor.authorChen, Jiangbo
dc.contributor.authorWang, Li
dc.contributor.authorSu, Xueqiong
dc.contributor.authorWang, Rongping
dc.date.accessioned2015-12-13T22:17:35Z
dc.date.issued2012
dc.date.updated2016-02-24T09:00:40Z
dc.description.abstractHigh purity Ga2O3, In2O3, and ZnO powders were weighted at a molar ratio of 1: 8: 1, and then InGaZnO (IGZO) ceramic target was fabricated by conventional solid state reaction method in air. IGZO thin films were subsequently prepared by pulsed laser deposition (PLD) method under different pressures at room temperature. The structural and physical properties of the as-grown films were diagnosed by various tools. It was confirmed that all the films exhibited amorphous structure. With the increase of oxygen pressure from 1.0 Pa to 15.0 Pa, surface roughness of IGZO films increased from 0.60 nm to 1.82 nm. The sample deposited under 10.0 Pa oxygen partial pressure had a maximum carrier mobility of 28.6 cm2/(V·s), a minimum resistivity of 5.57 × 10- 4 Ω cm, and a highest carrier concentration of 3.95 × 1020 cm- 3.
dc.identifier.issn0022-3093
dc.identifier.urihttp://hdl.handle.net/1885/71221
dc.publisherElsevier
dc.sourceJournal of Non-crystalline Solids
dc.subjectKeywords: Amorphous structures; As-grown films; Ceramic target; High purity; IGZO; Molar ratio; Oxygen partial pressure; Oxygen pressure; Room temperature; Solid state reaction method; Structural and physical properties; ZnO powder; Amorphous films; Oxygen vacancie IGZO; Oxygen vacancy; Pulsed laser deposition; Solid-state reaction
dc.titlePulsed laser deposited InGaZnO thin film on silica glass
dc.typeJournal article
local.bibliographicCitation.issue17
local.bibliographicCitation.lastpage2469
local.bibliographicCitation.startpage2466
local.contributor.affiliationChen, Jiangbo, Beijing University of Technology
local.contributor.affiliationWang, Li, Beijing University of Technology
local.contributor.affiliationSu, Xueqiong, Beijing University of Technology
local.contributor.affiliationWang, Rongping, College of Physical and Mathematical Sciences, ANU
local.contributor.authoremailu4219061@anu.edu.au
local.contributor.authoruidWang, Rongping, u4219061
local.description.embargo2037-12-31
local.description.notesImported from ARIES
local.description.refereedYes
local.identifier.absfor020400 - CONDENSED MATTER PHYSICS
local.identifier.ariespublicationf5625xPUB2615
local.identifier.citationvolume358
local.identifier.doi10.1016/j.jnoncrysol.2011.12.039
local.identifier.scopusID2-s2.0-84865735258
local.identifier.thomsonID000310394700130
local.identifier.uidSubmittedByf5625
local.type.statusPublished Version

Downloads

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
01_Chen_Pulsed_laser_deposited_InGaZnO_2012.pdf
Size:
735.21 KB
Format:
Adobe Portable Document Format
Back to topicon-arrow-up-solid
 
APRU
IARU
 
edX
Group of Eight Member

Acknowledgement of Country

The Australian National University acknowledges, celebrates and pays our respects to the Ngunnawal and Ngambri people of the Canberra region and to all First Nations Australians on whose traditional lands we meet and work, and whose cultures are among the oldest continuing cultures in human history.


Contact ANUCopyrightDisclaimerPrivacyFreedom of Information

+61 2 6125 5111 The Australian National University, Canberra

TEQSA Provider ID: PRV12002 (Australian University) CRICOS Provider Code: 00120C ABN: 52 234 063 906