Recovery dynamics of multifocal pupillographic objective perimetry from tropicamide dilation

Abstract

Purpose To study the pupillary system by combining mydriasis and multifocal pupillographic objective perimetry (mfPOP). In particular, we explored how the dynamics of recovery differ for concurrently measured direct and consensual sensitivity, response delay, and signal-to-noise ratios (SNRs) for binocular mydriasis. Methods We recruited 26 normal participants, all with brown irides. The dichoptic mfPOP stimuli concurrently assessed 44-region/eye and both pupils. Two pre-dilation tests were followed by pairs of repeated tests at 1, 2, 4, 6, 8, 12, 24, and 48 h following dilation of both pupils with 1% tropicamide. Three subjects were retested with only the right pupil dilated. Linear models determined the independent effects of mydriasis upon the per-region and pupil measures over time. Results Post-dilation, the per-region delays initially decreased by 16.3 ± 6.02 ms (mean ± SE) (p < 0.0001, cf. baseline of 471.1 ± 4.36 ms), then increased to slower than baseline by 17.42 ± 5.57 ms after 4 h (p < 0.002), recovering to baseline at 8 h. By comparison, per-region sensitivities (constriction amplitudes) were still reduced by − 6.20 ± 0.70 μm at 8 h (p < 0.0001, cf. baseline of 21.1 ± 0.55 μm), recovered at 24 h, but rebounded at 48 h (p = 0.005). The SNRs for sensitivities and delays both recovered by 8–12 h. Across all the data, sensitivities reduced by 2.67 ± 0.25 μm/decade of age, and delay increased by 15.4 ± 1.98 ms/decade (both p < 0.00001). Data from 3 of the 26 subjects who repeated the testing for monocular dilation found that consensual response sensitivities were larger than direct for 8 h (p < 0.018). Conclusions The per-region sensitivities were affected for longer than SNRs or delays. Strong early SNRs indicated proportionately lower pupil noise for larger pupil diameters. Following mydriasis with tropicamide 1%, the constriction amplitude measurements with mfPOP should be considered only after 48 h, but time-to-peak can be measured after 8–12 h. Show more