How does scanner choice and 3D model resolution affect data accuracy?

Abstract

Researchers using digital methods often collect data from 3D models at different resolutions, obtained using different scanning techniques. Although previous research has sought to understand whether scanning method and model resolution affect data accuracy, no study has systematically evaluated the sources of error associated with scanning method, data acquisition method and model resolution with the aim of providing practical recommendations about the model resolution required to yield sufficiently accurate data for specimens of given sizes. In this study, using data taken from primate specimens of three broad size categories, we test whether 3D models obtained using five different scanners (Breuckmann SmartSCAN, DAVID/HP 3D Pro S3, NextEngine 2020i, Creaform Go!Scan 20 and microCT/clinicalCT) yield accurate measurements. We assess whether caliper measurements can be used alongside measurements collected from 3D surface models, whether scanning resolution affects measurement accuracy, and how scan resolution, estimated using each scanner's proprietary software, compares to model resolution measured in a standardized way. Each scanner produces 3D models that yield accurate measurements for each size category, however, combining caliper data with those taken from digital models can be problematic. Our results indicate that the accuracy of measurements taken from 3D models depends on both object size and model resolution. Based on our findings, we recommend that small specimens should be scanned at <0.3 mm, medium specimens at 0.3-0.7 mm, and large specimens at 0.3-0.5 mm resolutions if data taken from 3D surface models are to be combined with caliper datasets. We further show, for the first time, that discrepancies in estimated final model resolution are frequently observed across software packages. We therefore recommend that researchers ensure that final model resolutions are adequate based on specimen size and are independently verified using a software package other than the scanner's proprietary software. Finally, we consider the implications of the findings that measurements obtained from surface models are variably consistent with those obtained using calipers.