Designing and Modelling of Nanostructures for Plasmonically Enhanced Hot-Electron Devices

dc.contributor.authorDolati, Noushin
dc.date.accessioned2021-02-08T00:15:13Z
dc.date.available2021-02-08T00:15:13Z
dc.date.issued2021
dc.description.abstractPlasmonically Enhanced Hot-Electron (PEH) devices are a new category of optoelectronic devices based on the excitation of hot electrons over a metal-semiconductor junction. Due to their spectral tunability, PEH devices have attracted interest for applications such as tailored photodetection, solar energy conversion, photocatalysis and water splitting. The efficiency of PEH devices depends on the absorption of incident photons in metal nanostructures, generation of hot-electrons and collection of them by injection over the Schottky junction. The internal quantum efficiency (IQE) of PEH devices is typically limited to a few percent on resonance. Theoretical work has shown that the rate of hot electron generation is dependent on the size of the metal nanoparticles (NPs). Metal NPs with diameters less than 10 nm have the highest generation rates, which could mitigate the low IQE of hot-electron devices. However, arrays of small NPs have limited absorption, and the resonant wavelength cannot be easily tuned. In this thesis, I demonstrate optical methods to optimize and control the absorption in small NPs. I design dual-scale plasmonic nanostructures, including large-scale Au gratings that can optimize the absorption and small-scale Au NPs that can increase the generation of hot-electrons in PEH devices. This research aims to demonstrate strong, tunable absorption in Au NPs to enhance the performance of PEH devices. Using 2D optical modelling, I investigate the effect of the coupling between different resonant modes of gratings and localised surface plasmons in Au NPs. I show that the wavelength and strength of the resonances can be tuned in small NPs absorption in the visible and infrared spectral regions. Furthermore, I demonstrate that introducing a dielectric layer between the NPs and the gratings can increase the absorption in the NPs up to 3.8-fold. These preliminary designs are a promising method to increase absorption in small NPs and achieve the tunability in absorption spectra for application in high-efficiency PEH devices in the future.
dc.identifier.otherb71500923
dc.identifier.urihttp://hdl.handle.net/1885/222374
dc.language.isoen_AU
dc.provenance2.7.22 - Author requested extension to restriction due to publication. 21.11.2022 - permission from author to make OA at end of restriction.
dc.titleDesigning and Modelling of Nanostructures for Plasmonically Enhanced Hot-Electron Devices
dc.typeThesis (MPhil)
local.contributor.authoremailu5942469@anu.edu.au
local.contributor.supervisorBeck, Fiona
local.contributor.supervisorcontactu4354306@anu.edu.au
local.identifier.doi10.25911/9KCK-N505
local.identifier.proquestYes
local.identifier.researcherIDhttps://orcid.org/0000-0003-1834-6571
local.mintdoimint
local.thesisANUonly.authore3ca251c-cddf-42f0-a702-7c3fb054129c
local.thesisANUonly.key83dfb52b-acee-ffd5-4cb2-d7554ae6268a
local.thesisANUonly.title000000024071_TC_1

Downloads

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Dolati Thesis 2021.pdf
Size:
4.75 MB
Format:
Adobe Portable Document Format
Description:
Thesis Material
Back to topicon-arrow-up-solid
 
APRU
IARU
 
edX
Group of Eight Member

Acknowledgement of Country

The Australian National University acknowledges, celebrates and pays our respects to the Ngunnawal and Ngambri people of the Canberra region and to all First Nations Australians on whose traditional lands we meet and work, and whose cultures are among the oldest continuing cultures in human history.


Contact ANUCopyrightDisclaimerPrivacyFreedom of Information

+61 2 6125 5111 The Australian National University, Canberra

TEQSA Provider ID: PRV12002 (Australian University) CRICOS Provider Code: 00120C ABN: 52 234 063 906