Chen, YingFitz Gerald, JohnChadderton, LewisChaffron, Laurent2015-12-132015-12-131422-6375http://hdl.handle.net/1885/93664Nanoporous structure was found in graphite samples after ball milling at ambient temperature. The internal micropore surface area, as determined using the T-plot method, was found to vary during milling, in association with phase transformations of the graphite. Structural changes from hexagonal to turbostratic, and to amorphous phases were observed and investigated using X-ray diffraction analysis and transmission electron microscopy. Carbon nanotubes were obtained by the annealing of the milled samples at 1400°C for 6 hours in nitrogen gas.Keywords: Annealing; Ball milling; Crystal structure; Nanotubes; Phase transitions; Porosity; Powders; Temperature; Transmission electron microscopy; X ray diffraction analysis; Amorphous phases; Carbon nanotubes; Hexagonal; Internal micropore surface area; Nanopor19992015-12-12