Hack, AlistairMavrogenes, John2015-12-080003-004Xhttp://hdl.handle.net/1885/30517Here we report on a newly developed, large-volume, cold-sealed capsule design for hydrothermal synthesis experiments in a piston-cylinder apparatus that should be useful for the production of synthetic fluid inclusions at pressures and temperatures not previously attained in gas- or fluid-pressurized reaction vessels. The design is adapted for large-volume experiments using a 30 mm internal-diameter pressure vessel, but can be scaled down to suit smaller pressure vessels, e.g., 15.9 mm (5/8″) internal diameter, if required. Calibration experiments show that temperature varies ±5 °C over the length of a 30 mm (length) × 15 mm (diameter) Cu capsule. The design incorporates the thermocouple within the capsule mass to optimize temperature control. Quartz-hosted H2O inclusions were synthesized over a range of conditions. Fluid-inclusion densities are consistent with the nominal experimental conditions, suggesting a friction correction is not required. This approach has several advantages over conventional hydrothermal experimental methods: (1) substantially higher pressures are attainable in piston-cylinder than hydrothermal and gas-media apparatus; (2) cold-sealing capsules avoid potential problems associated with welded capsules, such as solution modification; (3) capsule fluids are readily sampled ex situ; (4) the use of relatively thick-walled capsules minimizes H2-losses during experiments; (5) synthetic fluid inclusions can be used to derive fluid PVTX properties by combining conventional thermometry with analyses of individual fluid inclusions or independent mineral solubility data.Keywords: equipment; fluid inclusion; hydrothermal deposit; measurement method Cold-sealed capsule; Fluid PVTX properties; High-pressure and -temperature fluids; Hydrothermal studies; Isochore; Piston-cylinder apparatus; Synthetic fluid inclusions200610.2138/am.2006.18982015-12-08