Skip navigation
Skip navigation

Fabrication of low loss Ge₃₃As₁₂Se₅₅ (AMTIR-1) planar waveguides

Choi, Duk-Yong; Madden, Steve; Rode, Andrei; Wang, Rongping; Luther-Davies, Barry

Description

The authors describe the fabrication of low loss Ge₃₃As₁₂Se₅₅ rib waveguides. Pulsed laser deposition was used to obtain high quality, dense films with the same stoichiometry as the bulk glass, while standard semiconductor processing was used to pattern the waveguides. They obtained rib waveguides of 3, 4, and 5μm wide with propagation losses (0.3dB∕cm at 1550nm) more than ten times lower than previously reported for this material.

CollectionsANU Research Publications
Date published: 2007-07-05
Type: Journal article
URI: http://hdl.handle.net/1885/95160
Source: Applied Physics Letters
DOI: 10.1063/1.2754360

Download

File Description SizeFormat Image
01_Choi_Fabrication_of_low_loss_Ge[sub_2007.pdfPublished Version358.13 kBAdobe PDFThumbnail


Items in Open Research are protected by copyright, with all rights reserved, unless otherwise indicated.

Updated:  23 August 2018/ Responsible Officer:  University Librarian/ Page Contact:  Library Systems & Web Coordinator