Nearfield Broadband Array Design Using a Radially Invariant Modal Expansioin

Abstract

This paper introduces an efficient parameterization for the nearfield broadband beamforming problem with a single parameter to focus the beamformer to a desired operating radius and another set of parameters to control the actual broadband beampattern shape. The parameterization is based on an orthogonal basis set of elementary beampatterns by which an arbitrary beampattern can be constructed. A set of elementary beamformers are then designed for each elementary beampattern and the desired beamformer is constructed by summing the elementary beamformers with frequency and source- array distance dependent weights. An important consequence of our result is that the beamformer can be factored into three levels of filtering: (i) beampattern independent elementary beamformers; (ii) beampattern shape dependent filters; and (iii) radial focusing filters where a single parameter can be adjusted to focus the array to a desired radial distance from the array origin. As an illustration the method is applied to the problem of producing a practical array design that achieves a frequency invariant beampattern over the frequency range of 1:10 (which is suitable for speech acquisition using a microphone array), and with the array focused either to farfield or nearfield where at the lowest frequency the radial distance to the source is only three wavelengths.