Skip navigation
Skip navigation

In vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece

Song, Xiao-Fei; Yin, Ling; Han, Yi-Gang; Wang, Hui

Description

In vitro rapid intraoral adjustment of porcelain prostheses was conducted using a high-speed dental handpiece and diamond bur. The adjustment process was characterized by measurement of removal forces and energy, with scanning electron microscopic (SEM) observation of porcelain debris, surfaces and subsurface damage produced as a function of operational feed rate. Finite element analysis (FEA) was applied to evaluate subsurface stress distributions and degrees of subsurface damage. The results...[Show more]

dc.contributor.authorSong, Xiao-Fei
dc.contributor.authorYin, Ling
dc.contributor.authorHan, Yi-Gang
dc.contributor.authorWang, Hui
dc.date.accessioned2015-12-10T22:34:57Z
dc.identifier.issn1742-7061
dc.identifier.urihttp://hdl.handle.net/1885/56078
dc.description.abstractIn vitro rapid intraoral adjustment of porcelain prostheses was conducted using a high-speed dental handpiece and diamond bur. The adjustment process was characterized by measurement of removal forces and energy, with scanning electron microscopic (SEM) observation of porcelain debris, surfaces and subsurface damage produced as a function of operational feed rate. Finite element analysis (FEA) was applied to evaluate subsurface stress distributions and degrees of subsurface damage. The results show that an increase in feed rate resulted in increases in both tangential and normal forces (analysis of variance (ANOVA), P < 0.01). When the feed rate approached the highest rate of 60 mm min-1 at a fixed depth of cut of 100 μm, the tangential force was nearly seven times that at the lowest feed rate of 15 mm min-1. Consequently, the specific removal energy increased significantly (ANOVA, P < 0.01), and the maximum depth of subsurface damage obtained was approximately 110 and 120 μm at the highest feed rate of 60 mm min-1 using SEM and FEA, respectively. The topographies of both the adjusted porcelain surfaces and the debris demonstrate microscopically that porcelain was removed via brittle fracture and plastic deformation. Clinicians must be cautious when pursuing rapid dental adjustments, because high operational energy, larger forces and severe surface and subsurface damage can be induced.
dc.publisherElsevier
dc.sourceActa Biomaterialia
dc.subjectKeywords: analysis of variance; article; controlled study; dental care; drill; energy; finite element analysis; force; in vitro study; priority journal; scanning electron microscopy; surface stress; tooth prosthesis; Biomechanics; Dental High-Speed Technique; Denta Dental handpiece/bur; Fracture; In vitro; Intraoral adjustment; Porcelain prostheses
dc.titleIn vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece
dc.typeJournal article
local.description.notesImported from ARIES
local.identifier.citationvolume4
dc.date.issued2007
local.identifier.absfor090305 - Rehabilitation Engineering
local.identifier.absfor091201 - Ceramics
local.identifier.ariespublicationu4251866xPUB350
local.type.statusPublished Version
local.contributor.affiliationSong, Xiao-Fei, Tianjin University
local.contributor.affiliationYin, Ling, College of Engineering and Computer Science, ANU
local.contributor.affiliationHan, Yi-Gang, Tianjin University
local.contributor.affiliationWang, Hui, Tianjin University
local.description.embargo2037-12-31
local.bibliographicCitation.startpage414
local.bibliographicCitation.lastpage424
local.identifier.doi10.1016/j.actbio.2007.08.006
local.identifier.absseo920113 - Oro-Dental Disorders
dc.date.updated2015-12-09T10:24:10Z
local.identifier.scopusID2-s2.0-38949176674
CollectionsANU Research Publications

Download

File Description SizeFormat Image
01_Song_In_vitro_rapid_intraoral_2007.pdf2.1 MBAdobe PDF    Request a copy


Items in Open Research are protected by copyright, with all rights reserved, unless otherwise indicated.

Updated:  19 May 2020/ Responsible Officer:  University Librarian/ Page Contact:  Library Systems & Web Coordinator